 |
Description AutoScope Easy is system specially designed and tested as a cheap, reliable and easy to use tool for use primarily by automobile service professionals. It consists of a program in combination with the appropriate hardware adapter. Essentially this is a digital storage USB oscilloscope. Also it can be used by a wide range of other service professionals, which in their activities are facing the need of visualization of low frequency electrical signals, registration and recording slow-variable in time processes whose output value are an electrical signal or can be converted in such. The program included an extensive database to compare the signals and help system to work with it. Extremely small size of the oscilloscope makes it suitable for mobile applications where is necessary to use a laptop. What is typical for this model? • Well-designed electronic circuit device to reduce its own noise; • There is a built-in Pre-trigger 5% of the currently selected range by time; • Record series of the last 100 screens of the current measurement and recorded sequences may at any time to be open on the screen for review; • It allows the user to add their own examples to waveforms to database of the program by recording on only one screen to the base program. The name of the record is set by the user and can be both Latin and Cyrillic. User entries can be deleted if desired; • Built-in program sample waveform and also manuscript made sample records can be opened in a separate screen and to be compare to working screen current measurement. Typical applications The main purpose of AutoScope Easy is universal oscilloscope in voltage, it’s a universal tool and it’s not tied to brand or model car. It’s designed with excellent opportunities to test all types of sensors which are used in modern automobiles. With additional plug-ins and probes AutoScope Easy is used to: • Visualization and measurement of current in the circuit; • Preview the impulse of the absolute pressure; • Measurement of the signal in the primary circuit of the ignition; • Measurement of the signal in the secondary circuit of the ignition. It can record the results of all measurements for later analysis or to create a database of typical faults. |
|||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
PC Requirements: |
Operating system: |
|||||||||||||||||||||||||||
| To work with AutoScope Easy you can use any stationary PC or laptop with the following minimum requirements: • Processor - 1 GHz Pentium III, or equivalent • Memory - 128 MB (XP) • Free hard disk space – 700MB • IMPORTANT! USB 2.0¹ compliant port |
32-bit edition of Microsoft Windows • Microsoft Windows 2000 with SP3 • Microsoft Windows XP Home Edition with SP2 • Microsoft Windows XP Professional with SP2 • Microsoft Windows Vista • Microsoft Windows 7 On the used computer mandatory in advance must be installed the following programs: √ .NET Framework 2.0 Redistributable or later – is located on your provided CD. In Windows Vista and Windows 7, NET Framework is built into the operating system itself so it doesn’t have to be installed separately. √ Acrobat Reader version 5.0 or lasted – it is located on your provided CD Note: To communicate with its user interface adapter the program AutoScope Easy necessarily requires the correct USB drivers installed for it. |
|||||||||||||||||||||||||||
In the sets: |
||||||||||||||||||||||||||||
Warranty: |
||||||||||||||||||||||||||||
| • The program which works with AutoScope Easy never stop working after expiry a specified period. It can be install and run on more than one computers. • The version of the program to AutoScope Easy is not final. Each subsequent new updated and improved version of the program that works with this model oscilloscope will be completely free for our customers and will be downloaded from Download section. |
||||||||||||||||||||||||||||
 |
 |
 |
