Description

 mScope is system specially designed and tested as a cheap, reliable and easy to use tool for use primarily by automobile service professionals. It consists of PC program in combination with the appropriate hardware adapter. Essentially this is a 2channels digital storage USB oscilloscope.
 Using mScope is both fast and easy. Simply select the sensor or ignition circuit to be tested and the software will automatically load the required settings and give you full details of how to connect the mScope, along with advice on what the waveform should look like and general technical information on the component or system being tested.
 It is important to note, that an mScope is high efficiency automotive motor tester, also. The mScope is specially designed for automobile test and analysis of ignition systems. Ignition waveform test function can be used to test the primary and secondary waveforms of gasoline engine and display them in single cylinder waveform and parade waveform. It can be used to test ignition systems with or without distributor, and obtain ignition peak voltage, spark voltage and spark duration (with distributor).

What is typical for this model?

• Well-designed electronic circuit device to reduce its own noise;
• There is a built-in Pre-trigger 100% of the currently selected range by time;
• Record series of the last 200 screens of the current measurement and recorded sequences may at any time to be open on the screen for review;
• It allows the user to add own examples to waveforms to database of the program by recording on only one screen to the base program. The name of the record is set by the user and can be both Latin and Cyrillic. User entries can be deleted if desired;
• Built-in program sample waveform and also manuscript made sample records can be opened in a separate screen and to be compare to working screen current measurement.
• The program included an extensive database to compare the signals and help system to work with it.
• Small size of the oscilloscope makes it suitable for mobile applications where is necessary to use a laptop.

Typical applications

 The main purpose of mScope is universal oscilloscope in voltage, it is a universal tool and it is not tied to brand or model car. It’s designed with excellent opportunities to test all types of sensors which are used in modern cars.

 mScope is high efficiency of automotive motor tester. The mScope is specially designed for automobile test and analysis of ignition systems. Ignition waveform test function can be used to test the primary and secondary waveforms of gasoline engine and display them in single cylinder waveform and parade waveform. It can be used to test ignition systems with or without distributor, and obtain ignition peak voltage, spark voltage and spark duration (with distributor).

With additional plug-ins and probes mScope is used to:
• Visualization and measurement of current in the circuit;
• Preview the impulse of the absolute pressure;
• Measurement of the signal in the primary circuit of the ignition;
• Measurement of the signal in the secondary circuit of the ignition.

 It can record the results of all measurements for later analysis or to create a database of typical faults.

• mScope – main hardware unit;
• Universal probes – 2 pcs;
• USB cable;
• Setup CD with the program.